Hello all, I have to include package data which is in the RLGC matrix format (derived from Hspice) in IBIS files. There are different sets of matrices specified for the different sections like breakout2, via and the transmission line as shown in the figure. Also the length parameter is given for package trace. Seg 1 Seg 2 Seg 3 Seg 4 Seg 5 ----- ----- ----- ----- -------- Break Short Via Package Via & Out trace Long Trace Solder Ball +---+ +---+ +---+ +---+ +---+ ---+ +--x--+ +--x--+ +--x--+ +--X--+ +--- +---+ +---+ +---+ +---+ +---+ My problem is : 1> The package model section of the IBIS file does not provide an option to include RLGC matrices for multiple sections. 2> Also there is no keyword to specify the length for the traces when the "model data" option is used. This option is provided only when "Number of sections" is used. But since "Number of sections" and "model data" option is mutually exclusive I cannot use this. Hence how do I go about including multiple sets of matrices in the IBIS file? Looking forward for your reply. Thanks, Granthana Force Computers (India)Pvt Ltd Ph: +91-80-5356060 Ext 253 Fax: +91-80-5354025 E-mail: granthana.kr@xxxxxxx ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu