Hi, SI Gurus,
Although Synopsys claimed HSPICE2004.09 support .ICM command in
the release notes. However, we did not get any information the user
guide. Do you know the syntax regarding .ICM command? Thank you for
your helps in advance.
Best Regards,
Sogo Hsu, Ph. D.
Simulation center/Foxconn
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu