[SI-LIST] Re: [IBIS] RE: [IBIS-Users] Re: Regarding IBIS Validation

From: "abhishek goswami" <dmarc-noreply-outsider@xxxxxxxxxxxxx> (Redacted sender "zeal_goswami@xxxxxxxxx" for DMARC)
To: Chetan Kumar <Chetan.Kumar@xxxxxxx>, "ibis@xxxxxxx" <ibis@xxxxxxx>, "ibis-users@xxxxxxx" <ibis-users@xxxxxxx>, "si-list@xxxxxxxxxxxxx" <si-list@xxxxxxxxxxxxx>
Date: Wed, 15 Oct 2014 17:09:22 +0800

Hi Chetan,
Yes My question is related to VT validation of data along with Rise and Fall 
waveform. In brief, all data points. Do you know any tool which is open source 
and use for validating IBIS data point. 
Thanks
Abhishek Goswami
Phone No -07829580867/9962270999
Skype : abhishekgoswami1
 
 From: Chetan Kumar <Chetan.Kumar@xxxxxxx>
To: abhishek goswami <zeal_goswami@xxxxxxxxx>; "ibis@xxxxxxx" <ibis@xxxxxxx>; 
"ibis-users@xxxxxxx" <ibis-users@xxxxxxx>; "si-list@xxxxxxxxxxxxx" 
<si-list@xxxxxxxxxxxxx> 
Sent: Wednesday, 15 October 2014 1:48 PM
Subject: [IBIS] RE: [IBIS-Users] Re: Regarding IBIS Validation
  

Hi Abhishek, 
  
Do you mean be viewing the waveform? 
  
If Yes, then there Hyperlynx visual ibis editor where you can view the V-t 
data. 
  
If your question is related to validating this Vt data then there are 
commercially available tools like T2B , IOMeth etc which run spice simulations 
to verify the  accuracy of the tabulated data in IBIS file. 
  
Regards 
Chethan 
  
From:owner-ibis-users@xxxxxxx [mailto:owner-ibis-users@xxxxxxx] On Behalf Of 
abhishek goswami
Sent: Wednesday, October 15, 2014 1:36 PM
To: ibis@xxxxxxx; ibis-users@xxxxxxx; si-list@xxxxxxxxxxxxx
Subject: [IBIS-Users] Re: Regarding IBIS Validation   
  
<sending again As did not message>  
  
   
Hi All,  
I am not very expert in IBIS modelling and have very small query. In our 
system, we have tool which generate IBIS file and contain information about 
rise and fall waveform. In current scenario, I have to change r_fixture value 
and need to generate IBIS file. I am able to generate IBIS file and contain all 
data points. I want to very all data points which is present in IBIS file. Is 
there any tool/mythology available to  verify IBIS data points. I have run 
ibischk5 and did not get any error. In brief, I want to verify all points  
in IBIS.  
   
Thanks
Abhishek Goswami
Phone No -07829580867/9962270999
Skype : abhishekgoswami1     
         
      

-- 
This message has been scanned for viruses and 
dangerous content by MailScanner, and is 
believed to be clean.   
-- 
This message has been scanned for viruses and 
dangerous content by MailScanner, and is 
believed to be clean. 
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List forum  is accessible at:
               http://tech.groups.yahoo.com/group/si-list

List archives are viewable at:     
                //www.freelists.org/archives/si-list
 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

[SI-LIST] Re: [IBIS] RE: [IBIS-Users] Re: Regarding IBIS Validation

Other related posts: