Hi, 1. I am currently trying to run a simulation using a software called Hyperlynx 7.2 . I need to build a model for pogo pin and how can I create a file(in .slm format) if I already have all the specifications of the pogo pin...Is there any guide to write this file(.slm format)? 2. Is there anyway that i can set a tester(driver) in Hyperlynx to a particular set of pattern(say 0110) and observe the result at the moment the driver finshes driving? ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu