Hello Eric, I used eldo with switches in the hspice netlist - and the result was comparable. BTW - here's a more comprehensive study to compare a few simulators. I find it fascinating. http://www.deepchip.com/items/snug03-22.html Here is a poll for simulators as well. http://www.edaboard.com/viewtopic.php?t=104713 Regards, Ambrish. Ambrish K Varma akvarma@xxxxxxxx North Carolina State University ph(919)513-2015, fax(919)515-2285 -----Original Message----- Date: Fri, 11 Feb 2005 14:31:12 -0500 From: "Eric Steimle" <steimle@xxxxxxxxxxxxx> Subject: Hspice vs. Eldo w hspice compatibility mode Does anyone have any experience using Eldo with hspice compatibility mode? Does it work well? I'm trying to make a decision between hspice and eldo and I'd appreciate any feedback some current users could give. Thanks in advance, Eric ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu