Hi, I am trying to simulate a basic rectangular patch antenna on HFSS (this will have poor bandwidth, obviously!!!). I have included the airbox (radiation boundary), an edge-fed rectangular patch (metallised, perfect-E) and a ground plane that is also a perfect E. The patch is designed for 1.5 Ghz and I have given the correct dimensions, and when I request the Return Loss (i.e. S11) against frequency, I do not get resonance at 1.5GHz, or anywhere else for that matter. I was wondering if you could help me use a method to get a bandwidth under -10dB. A quick response is greatly appreciated. Please respond to neilmallik@xxxxxxxxxxxx Thank you in advance. Neil. --------------------------------- BT Yahoo! Broadband - Save £80 when you order online today. Hurry! Offer ends 21st December 2003. The way the internet was meant to be. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu