[SI-LIST] Re: Ground problems

  • From: stephanie.goedecke@xxxxxxxxxxx
  • To: raman@xxxxxxxxxxxxx
  • Date: Wed, 28 May 2003 09:23:00 +0200

Hi Ramana,

I think it might not be a 0 Ohm resistor.  Would you consider replacing it with
a wire, and repeating the measurement?

regards,
Stephanie


Stephanie Goedecke

Philips - SP3D Chip Design GmbH
Petersbrunnerstr.17
82319 Starnberg / Germany

Phone:  +49-8151-270-160
Fax : +49-8151-270-200



                                                                                
                        
                                                                                
                        
                                                   To:   
<si-list@xxxxxxxxxxxxx>                        
                                                   cc:   (bcc: Stephanie 
Goedecke/STN/SC/PHILIPS)       
                                                   Subject:    [SI-LIST] Ground 
problems                
                                                                                
                        
               "Ramana Rao Rayudu"                 Classification:              
                        
               <raman@xxxxxxxxxxxxx>                                            
                        
                                                                                
                        
               Sent by:                                                         
                        
               si-list-bounce@freelists                                         
                        
               .org                                                             
                        
                                                                                
                        
               2003-05-27 01:45 PM                                              
                        
               Please respond to raman                                          
                        
                                                                                
                        
                                                                                
                        




Hello,

We are testing the power supply (VRM 8.5 compatible) for our processor
board.

We have a split ground - the power supply ground and the digital ground
shorted at one single point with a 0 ohm resistor. There is no signals
crossing over and I do not think there are any loops.


The voltage difference between the 2 grounds is very large. The CRO shows
a p-p of 2V when measuring between the 0 ohm resistor.


What could be the reason for this and what could the remedies.


Thanks and Regards

Ramana Rao Rayudu
Real Time Systems Group
Centre For Development Of Advanced Computing
No.1 Old Madras Road, Byappanahalli
Bangalore - 38, India
Ph 91-80-5244059

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:
                         //www.freelists.org/archives/si-list
or at our remote archives:
                         http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                         http://www.qsl.net/wb6tpu






------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: