[SI-LIST] Re: [Fwd: Re: FW: Copper interface cable proposal]
- From: "Dima Smolyansky" <Dima@xxxxxxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Thu, 30 Aug 2001 15:18:53 -0700
Rich, happy to answer your question:
To answer your question, we will have the ability to run the software on
TDS8000 and acquire data from the scope locally as soon as (i.e,
simulteneously with the time when) Tektronix releases their interface inside
TDS/CSA8000 to enable such funcionality. The latter event should happen
shortly. Not being a Tektronix employee, I can not comment on when the exact
date when they will release this interface.
Thanks,
===================
Dima Smolyansky
TDA Systems, Inc.
11140 SW Barbur Blvd., Suite 100
Portland, OR 97219
(503) 246-2272
(503) 246-2282 (fax)
(503) 804-7171 (mobile)
If you want to keep up on recent TDR news, subscribe to our TDR Measurement
Newsletter at www.tdasystems.com!
> -------- Original Message --------
> Subject: [SI-LIST] Re: FW: Copper interface cable proposal
> Date: Thu, 30 Aug 2001 09:52:04 -0400
> From: "Rich Peyton" <p2rich@xxxxxxxxxxxxx>
> Reply-To: p2rich@xxxxxxxxxxxxx
> To: <david_instone@xxxxxxxxxxxxxx>, <jaydiep@xxxxxxxxxx>
> CC: <si-list@xxxxxxxxxxxxx>
>
>
> My 2C
>
> I'm not from Tek, and I have an 11801, I do not find it
> "incomprehensible"
> that Tek stop supporting the unit. As I see it - It's all a matter of
> incoming revenue vs. cost of supporting it and whether the stopped
> support
> will increase sales of newer model and support which is the CSA8000.
>
> Why'd they discontinue the 11801 if it had such a large install base?
> "Technology"-always on the move !
>
> If I was to decide on a Model I'd definitely go with the CSA8000 and
> you'd
> wouldn't have to worry whether you lose support or not, which I had the
> pleasure to see at a "TDA Systems Seminar" & also had TEK there
> representing
> the CSA8000.
>
> It had allot of nifty features and had a windows based screen which I
> liked.
> I think they were talking about integrating TDR software into it as an
> option- Maybe Mr. Smolyansky could confirm that- He's on SI List.
>
> If your interested & with questions on the CSA8000:
>
> Tektronix
> Hank Crombie
> 1-800-545-2712x4720
>
> I think CSA8000 base price is around 20K.
>
> Regards,
> Rich
>
>
>
>
>
> -----Original Message-----
> From: si-list-bounce@xxxxxxxxxxxxx
> [mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of David Instone
> Sent: Thursday, August 30, 2001 8:03 AM
> To: jaydiep@xxxxxxxxxx
> Cc: si-list@xxxxxxxxxxxxx
> Subject: [SI-LIST] Re: FW: Copper interface cable proposal
>
>
>
> Thanks Jan, However all the parts and modules are still listed in Teks
> 2001 Catalog, and I've had no such warnings given to me. In fact I have
> just recd a cal due notice from Tek for my equipment and it makes no
> mention that these are going out of production. Due to the VERY large
> installed base of 11801's and 803's I personally find it
> incomprehensible that Tek should wish to even suggest that they wish to
> stop supporting this equipment. Anyone from Tek care to comment?
>
> Dave
>
> Jay Diepenbrock wrote:
> hanlimitations. Be aware that the 11801/CSA803 and accompanying
> plug-ins
> > including the SD-24, etc. have all been discontinued. Their service
life
> > may also be limited due to dwindling availability of parts. We have
some
> > of these 'scopes and heads, and we keep getting warnings from Tektronix
> > about how they don't know how long they'll be able to fix them. They
are
> > available on the used market, but the SD-24s in particular are getting
> hard
> > to find and very expensive. So, if you plan to keep it for a long time,
> > you might be better off with the CSA8000 or the similar box from Agilent
> > which are both current products.
> >
> > Good luck in your search.
> >
> > Thanks.
> >
> > Jay Diepenbrock
> >
> > Senior Engineer
> > Interconnect Technology & Qualification
> > IBM Global Procurement, B8UA/061, RTP, NC
> > Phone: 919-543-8804 Fax: 919-543-3642
> > Email: jaydiep@xxxxxxxxxx
>
> >
> > ------------------------------------------------------------------
> > To unsubscribe from si-list:
> > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> > For help:
> > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> >
> > List archives are viewable at:
> > //www.freelists.org/archives/si-list
> > or at our remote archives:
> > http://groups.yahoo.com/group/si-list/messages
> > Old (prior to June 6, 2001) list archives are viewable at:
> > http://www.qsl.net/wb6tpu
> >
>
> --
> Regards
>
> Dave Instone. Compliance Engineer
> Storage Systems Development, MP24/22
> Xyratex, Langstone Rd., Havant, Hampshire, P09 1SA, UK.
> Tel: +44 (0)23-92-496862 (direct line)
> Fax: +44 (0)23-92-496014
> http://www.xyratex.com Tel: +44 (0)23-92-496000
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List archives are viewable at:
> //www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List archives are viewable at:
> //www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
- » [SI-LIST] Re: [Fwd: Re: FW: Copper interface cable proposal]
