Yes, and we've been using StatEye for the past 12 months extensively. :-) Cheers, Stefan Vinu Arumugham wrote: >StatEye takes a few minutes to generate an eye diagram from >S-parameters. It too includes crosstalk effects. StatEye also includes a >DFE. >It may take hours though for a simulator to generate the S-parameters or >TDT/pulse response of the channels. > >Thanks, >Vinu > >Dima Smolyansky wrote: > > > >>Hello, >> >>I think one key issue here is the time it takes to generate the eye. In our >>IConnect software, an CJTPAT eye can be generated based on S21 or TDT (time >>domain transmission data) in a manner of seconds. Effects of crosstalk can >>be easily measured and added to the eye, and the eye opening/jitter >>information can be measured as well. How long does it take to do this in >>simulator? Hours? >> >>Thanks, >> >>=================== >>Dima Smolyansky >>TDA Systems, Inc. >>4000 Kruse Way Place >>Bldg. 2, Suite 300 >>Lake Oswego, OR 97035 >>(503) 246-2272 >>(503) 246-2282 (fax) >> >>IConnect(R) S-parameters version 3.5 is released! >>Request your quote for IConnect S-parameters now! www.tdasystems.com >> >> >> >> >>>Hi Jayaprakash, >>> >>>although not directly applicable to your problem, but for the benefit of >>>other readers, who're looking for such capabilities, I thought I would >>>mention that Apache Design Solutions has a tool called eyed in their >>>nspice package, which generates eye diagrams based on the output of >>>.probe statements. We've extensively used it more than 18 months ago, >>>but I don't know where it stands now. >>> >>>People have also written scripts (as Scott has mentioned), which do the >>>same task (i.e. make a picture and measure the eye). >>> >>>Cheers, >>> >>>Stefan >>> >>>Jayaprakash wrote: >>> >>> >>> >>> >>> >>>>Hi , >>>> >>>> Is it possible to measure eye diagram height and >>>>width (not graphically) in HSPICE simulations? >>>> >>>>Thanks, >>>> >>>>Best regards, >>>> Jayaprakash. >>>> >>>> -- Ludwig Systems Engineering Consulting - Design - Implementation WWW: www.ludwigsystems.com System Architectures - FPGAs - PCBs Ph/Fx: +41-43-355-58-73/74 Hardware - Firmware - Software ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu