Hello All! Is there a risk of damaging a device if an LVPECL voltage swing is driven into an LVDS receiver? *** (not designed to work like this, but in case of user error this could happen ) *** If the voltage swing is about 750 to 1000 mV with a offset of 2.0 Volts, will it damage the LVDS receiver? The LVDS receiver has an embedded 100 ohm termination resitor between the +/- pins. At the moment the connection is point to point without AC coupling. I would appreciate a response if some of you have come accross this one. Thank you. Sal Aguinaga Jr. Rolling Meadows, IL __________________________________________________ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: http://www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: http://www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu