[SI-LIST] DDR3 On-Board

Hi Guys,
While using DDR3 on board, the same clock travels to four chips and is routed 
serially (fly-by topology).  I am planning to place one termination near each 
chip.  Will this be better or placing a termination resistor at the end of the 
clock would be better?

Regards,
Jebakumar Samuel
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: