[SI-LIST] Re: DC Power supplies Connected in parallel
- From: "Erfan" <erfan@xxxxxxxxxxxxxxx>
- To: "'Istvan Novak'" <istvan.novak@xxxxxxxxxxx>
- Date: Sat, 11 Aug 2012 17:40:07 +0300
Istvan,
For now I wanted to know what happens in this condition and also wanted to
know practical issues of using them in this fashion? It is not for any
purpose but to know what exactly happens in this context.
-----Original Message-----
From: Istvan Novak [mailto:istvan.novak@xxxxxxxxxxx]
Sent: Saturday, August 11, 2012 5:37 PM
To: erfan@xxxxxxxxxxxxxxx
Cc: si-list@xxxxxxxxxxxxx
Subject: Re: [SI-LIST] Re: DC Power supplies Connected in parallel
Erfan,
Next question is: do you want to do this on purpose, say feeding some
electronics either from 12V or from 5V, or do you try to find out what
happens when two outputs set to very different voltages get shorted
unintentionally?
Regards,
Istvan Novak
Oracle
On 8/11/2012 10:30 AM, Erfan wrote:
> Hai Istvan Novak,
>
> I am talking about 2 different power supplies one set to 12V and other set
> to 5V. What happens when this 2 supplies are connected in parallel?
>
> Regards,
> Erfan
>
> -----Original Message-----
> From: Istvan Novak [mailto:istvan.novak@xxxxxxxxxxx]
> Sent: Saturday, August 11, 2012 5:27 PM
> To: erfan@xxxxxxxxxxxxxxx
> Cc: si-list@xxxxxxxxxxxxx
> Subject: Re: [SI-LIST] Re: DC Power supplies Connected in parallel
>
> Erfan,
>
> Are you talking about connecting 12V and 5V outputs together or are you
> talking about connecting in parallel nominally the same output voltages
> generated from different (5V and 12V) input voltages? Both questions
> may be legitimate, but the answers and tradeoffs could be very different.
>
> Regards,
>
> Istvan Novak
> Oracle
>
> On 8/11/2012 9:12 AM, Erfan wrote:
>> Hai Steve,
>>
>> Is it a good idea to put a different power supplies in parallel (like I
> said
>> 12V and 5V). If they are not current limited what happens? Is this
>> configuration usable? Also what happens if they are current limited?
>>
>> Can you give some detailed explaination.
>>
>> Regards,
>> ERFAN
>>
>> -----Original Message-----
>> From: steve weir [mailto:weirsi@xxxxxxxxxx]
>> Sent: Saturday, August 11, 2012 12:37 PM
>> To: si-list@xxxxxxxxxxxxx
>> Subject: [SI-LIST] Re: DC Power supplies Connected in parallel
>>
>> On 8/11/2012 2:13 AM, Erfan wrote:
>>> Hai Everyone,
>>>
>>>
>>> I have few questions regarding the DC power supplies.
>>>
>>>
>>>
>>> What happens when 2 DC-power supplies are connected in parallel which
has
>> 2
>>> different voltages let say one has 12V and other has 5V.
>> It depends on the power supply designs. If they are not current
>> limited, you replace the fuses and perform other necessary repairs.
>>
>>> What happens to
>>> their voltage and current, current has to get added up to my knowledge
>> does
>>> it really happen in this case?
>> Ohm's Law prevails.
>>> What happens to voltage do I see 12V or 5V?
>>> what happens in case of grounds are isolated and not isolated?
>>> If I have to
>>> generate more current using 2 DC supplies in parallel then what care or
>>> configuration I should use. Wanted to know the practical limitations of
>>> using them.
>>>
>> Use supplies designed to share current.
>>>
>>>
>>> Kindly through some light in this regard.
>>>
>>>
>>>
>>> Regards,
>>>
>>> Erfan
>>>
>>>
>>>
>>>
>>>
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
