I have a circuit that will be connected through LVDS terminated with 100 ohms. I am only running Clk, Data In, Data Out and Sync signals @ 33MHz. The LVDS drivers are driven from Xilinx CPLD. The connections on board are short and direct from the connector. I need to specify the connector and have little experience with si. Can someone make a suggestion, please as to an appropriate connector and manufacturer. Your help would be greatly appreciated. Thank you, Steve ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu