[SI-LIST] Calling libraries in Hspice

Hi,
I have two different libraries that I am trying to call inside a
subcircuit using if-else statements and Hspice gives me a arith eval -
no operand address error.
Does anyone know what is going on? I have the following lines in my
subckt. If I use only one .lib statements everything works fine.

.if (ddr2_533==1)
.lib 'ddr2_lib' typ_533
.else
.lib 'ddr2_lib' typ 667
.endif

Thanks,
Nikhil 


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: