Hi, Can anyone give me some references of IBIS models for CML drivers and receivers (or transceivers) for Hyperlynx simulation? Other question: has anyone of you ever use a Spice model of a connector (not available in ibis) and rename it as a ".SLM" file in order for Hyperlynx to recognise it? I have tried that on a Spice model for a Teradyne Nexlev connector, but it is not recognised in the Hyperlynx connector browser. Thank you for your help, Regards, Jean-Pierre -------------------------------------------------------------------- Jean-Pierre BOUTHEMY Hardware Design Engineer ALCATEL - Mobile Networking Division (MCG) Mobile Core R&D +33 (0)2 99 26 08 18 mailto:jean_pierre.bouthemy@xxxxxxxxxx -------------------------------------------------------------------- ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu