Hi, I am pretty new to ADS and looked through the design examples and did not really find an example of a power delivery system simulation. I don't have a great deal of time to spend on developing this from scratch, as I have a "day job" that involves getting real boards out to fab in a hurry. I was wondering if someone out there would be willing to share a template or a basic project where a linear regulator was modeled, a substrate was chosen and several decoupling capacitors placed. I would like to observe the impedance of the power plane at different load switching frequencies. Again, I am sure that it would not be all that hard to put together but I don't really have a lot of time. Thanks Tom ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu