Hi all I've attached the macro model(spice) of LNA AD8334,in this model the following 5 lines cause errors in simulating ,how can i change these lines to be able for correct simulation? what's the solution? I simulate this spice model in nexxim or ADS,in both we have errors in interpreting. GB11 CM1 25 Value = {(V(LON1)-V(CM1))*V(ENL1)*1U} ... GB12 CM1 30 Value = {(V(LOP1)-V(CM1))*V(ENL1)*1U} ... GB9 21 0 Value = {I(VSNS2)*V(ENL1)} GB10 14 0 Value = {I(VSNS1)*V(ENL1)} ... EB13 74 0 Value = {IF(V(ENBL) - V(COML) < 1.625 , 0 , 1)} Regards Haghtalab ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu