[SI-LIST] AD8334 LNA SPICE Macro-model

Hi all
 
I've attached the macro model(spice) of LNA  AD8334,in this model the following 
5 lines cause errors in simulating ,how can i change these lines to be able for 
correct simulation?
what's the solution?
 
I simulate this spice model in nexxim or ADS,in both we have errors in 
interpreting.
 
 GB11 CM1 25 Value = {(V(LON1)-V(CM1))*V(ENL1)*1U}
...
GB12 CM1 30 Value = {(V(LOP1)-V(CM1))*V(ENL1)*1U}
...
GB9 21 0 Value = {I(VSNS2)*V(ENL1)}
GB10 14 0 Value = {I(VSNS1)*V(ENL1)}
...
EB13 74 0 Value = {IF(V(ENBL) - V(COML) < 1.625 , 0 , 1)}
 
Regards 
 
Haghtalab

      
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: