[SI-LIST] 200ohm to 50ohm Baluns (200ohm diff impedance?)
- From: "Mitch S. Morey" <cadpro2k@xxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Thu, 21 Oct 2004 14:49:46 -0700 (PDT)
Hi all,
Has anyone had experience with the 200ohm to 50ohm baluns from TDK? If so,
were you (did you) able to define a 200ohm differential impedance
structure on the printed circuit board it was used on? How do you get a
200ohm differential impedance structure at all? Anyone? The circuit
structure only works out to be about 1/4 inch long, but some engineers
question what would happen if it doesn't get 200ohms.
Any help is appreciated. Thanks.
Mitch
-----------------------------------------
Stay ahead of the information curve.
Receive PCB news and jobs on your desktop daily.
Subscribe today to the PCB CafeNews newsletter.
[ http://www10.pcbcafe.com/nl/newsletter_subscribe.php ]
It's informative and essential.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
