Here is that coating that might be something to consider on your Kennel
floors!! I thought about getting a gallon for a puppy floor!! Angela
Angela Scott
Orion GSD
-------- Original message --------
From: centraldivision@xxxxxxxxxxxxx
Date: 11/17/16 9:37 AM (GMT-06:00)
To: centraldivison@xxxxxxxxx
Subject: Re: Promo Extended Kennel\Cattery and Dog Run Sealer-Coating Info
CentralDivisionSupplies
_______________________________
370 dogwood rd. w.
mastic beach, n.y.11951
office: 631-399-0213
e-mail: centraldivision@xxxxxxxxxxxxx
EXTENDED TILL
November 18TH
Thank You! For your continued interest
Steel-Guard* Kennel\Cattery and Dog Run Sealer-Coating
Hello, I hope your season is going well, a while back we had emailed you
regarding Steel-Guard* Sealer-Coating. At that time we were running a special
promotion.
Due to the tremendous response we held the promotion
Below is the original inquiry we sent and the discount promotion we ran. Please
keep in mind one of the nice features of Steel-Guard is that it can be applied
in sections. If you purchase any quantity during the promotion we will freeze
and hold the discount price for an additional 2 years.
Please open attachments to see a few of our customer’s floors!
Colors available: Open Color Chart Attachment
Steel-Guard
COMMERCIAL & INDUSTRIAL KENNEL\CATTERY & DOG RUN SEALER-COATING
Ø Steel-Guard* Is 100% EPOXY . For CONCRETE, WOOD, OR METAL. Steel-Coat Can
be used INDOORS and OUTDOORS.
Ø Steel-Guard* Requires very little PREP, Just a good bristle brush sweep. A
quick light cleaning and etching. Steel-Coat will adhere to any existing
coating or paint. Make sure the surface area is fully dry before application.
Ø Steel-Guard* Will Not POP-UP, CHIP, FADE, SCRATCH, STAIN or CRACK up to 20
years
Ø Steel-Guard* Dries to a strength of 30,000. per SQ. in. {almost 4x stronger
than concrete} and will form a 100% moisture & acid proof barrier.
Ø Steel-Guard* Will make your CLEAN -UPS a lot EASIER, just a mop-n-bucket or
the pressure from a garden hose is all you need.
Ø Steel-Guard* Can be applied in SECTIONS, go back 2-days or 2-months later
and Steel-Coat will MELD SECTION to SECTION. Each Master Kit 2A + 2B covers
500 SQ. FT.
Ø Steel-Guard* Will fill all CHIPS, CRACKS, PITTED, HOLES, up to 1/8th of an
in deep with one application, and bring you back to a level surface.
Ø Steel-Guard* Will dry to a full cure in 12 to 15 hours, to a SMOOTH, MEDIUM
GLOSS FINISH, that is 100% SLIP- PROOF without the sandy grit.
Steel-Guard* @ $299.95 per Master Kit = 500 Sq.Ft.
4 Master Kits = 2000 sq.ft.
2 Master Kits = 1000sq.ft.
$159.95 @ 1/2 Kit = 250 Sq.Ft.
Attachment:
color chart chips.JPG
Description: color chart chips.JPG
Attachment:
Steel-Guard KENNEL PICTURES.doc
Description: Steel-Guard KENNEL PICTURES.doc