On 29 Sep 2007 18:56:02 -0000, radhakrishnan moothery <rasnan@xxxxxxxxxxxxxx> wrote: > 1. i tried the command 'xrandr -s 1024x768' to change the monitor display > resolution. but it didn;t work. what could be the reason. the right way to set the screen resolution is to reconfigure the XServer or edit the configuration file. (dpkg-reconfigure xserver-xorg or /etc/X11/xorg.conf in new version) > 2.Network Interface Card: "Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10)".this net work card is not detecting in one > system. but in some other systems it is detecting. how is it get detected. Try installing the latest kernel with the command apt-get install linux-image-2.6.21-2-XXX (replace XXX with the 486 or 686 based on the value you get with the command uname -r) > 3.if pen drives do not mount automatically if there is any way to mount it. Did you got this problem in IT@School GNU/Linux 3.0? In older version there is some problem which is not yet identified. regards, ~vimal For Tips and Tricks on School GNU/Linux visit http://support.space-kerala.org To change your subscription options to this list visit http://support.space-kerala.org/mailinglist.html