The *Rolleiparkeil *should have a dot on the rim. Make sure the dot is at the top when installed on the viewing lens. Jeff On Thu, May 15, 2008 at 6:45 PM, Richard Knoppow <dickburk@xxxxxxxxxxxxx> wrote: > > ----- Original Message ----- From: "X.TRUONG" <truongthx@xxxxxxx> > To: <rollei_list@xxxxxxxxxxxxx> > Sent: Thursday, May 15, 2008 6:25 PM > Subject: [rollei_list] Re: Differences between Rolleinar variants > > > Dear, > I have a rolleiparklei, too. But I do not know how to use it. It has 3 > pieces, one plug in viewing len, and two are same. > > Xuan Truong > > The old three piece system has two close-up lenses, one for the taking > lens and one for the viewing lens, the third part is a prism for use on the > viewing lens to correct for parallax. I am not sure but think it goes on top > of the close up lens part. The later version of the close-up lens system > combines the viewing lens with the prism so there are only two pieces. > > --- > Richard Knoppow > Los Angeles, CA, USA > dickburk@xxxxxxxxxxxxx > --- > Rollei List > > - Post to rollei_list@xxxxxxxxxxxxx > > - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the > subject field OR by logging into www.freelists.org > > - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in > the subject field OR by logging into www.freelists.org > > - Online, searchable archives are available at > //www.freelists.org/archives/rollei_list > >