How big is the rocket and how big is the camera? Won't effect the altimeter bay since I'm assuming the camera will be well down stream.
On Mon, Apr 9, 2012 at 7:14 AM, Lesnick, Mike wrote:
I would appreciate advice on where to place a camera on a large rocket as well, I was thinking about installing a couple of weld nuts insidethe airframe between the fins. This would be the same technique used tosecure the rail buttons, but, instead I would use them to secure the camera pod mount. Is it OK considering stability and other factors like not interfering with the altimeter bay to place a camera between the fins? Mike Michael Lesnick Axiom Healthcare Group 18135 Santa Lauretta Cir Fountain Valley, CA 92708 714-594-5720 - Office Phone 714-323-5968 - Cell 714-968-7076 - Fax MikeL@xxxxxxxxxxx -----Original Message----- From: roc-chat-bounce@xxxxxxxxxxxxx [mailto:roc-chat-bounce@xxxxxxxxxxxxx] On Behalf Of Michael Klett Sent: Sunday, April 08, 2012 5:40 PM To: ROC Chat Subject: [roc-chat] Contour Roam Camera ROCers,I am planning my L3 Certification flight in June at ROCstock unless the rocket isn't ready in which case it will be the July launch. The rocketis a fiberglass Frenzy XL with a 4" air frame and a 75 mm motor mount. It stands just about 8 feet tall. If it's successful it will be the only L3 flight that I do. Yes, I should be able to fly it again butthey won't be cert flights. I'd like to document this flight as well asI can and I'm thinking about mounting a Contour Roam camera ( http://store.contour.com/contourroam-1080p-camera-p65.aspx?gclid=CPmm-_P Cpq8CFWlgTAodx2vhXw ) on it to record the flight. Has anyone used a Contour Roam on a rocket? How did you attach it? How does the Contour Roam compare with Booster Vision (my other choice of camera)? I have some of the key chain cameras that I also plan on attaching torecord alternate views in case something goes wrong - I'd like to try tofigure out what happened. But for the main on-board camera I'd like true HD for posterity. Thanks in advance for any advice that you can offer in this area. Thanks, Mike -- ROC-Chat mailing list roc-chat@xxxxxxxxxxxxx //www.freelists.org/list/roc-chat -- ROC-Chat mailing list roc-chat@xxxxxxxxxxxxx //www.freelists.org/list/roc-chat
-- ROC-Chat mailing list roc-chat@xxxxxxxxxxxxx //www.freelists.org/list/roc-chat