[racktables-users] Re: what's needed to get live ports/cdp/lldp working?
- From: Jonathan Barker <jonathanbarker@xxxxxxxxxxxxxxxx>
- To: "racktables-users@xxxxxxxxxxxxx" <racktables-users@xxxxxxxxxxxxx>
- Date: Thu, 20 Mar 2014 18:37:10 -0700
Thanks. I saw code and skipped over it, hoping there was a more user-friendly
way of setting it up.
I'll work with my network admin to test it out.
From: racktables-users-bounce@xxxxxxxxxxxxx
[mailto:racktables-users-bounce@xxxxxxxxxxxxx] On Behalf Of Olivier Contant
Sent: Thursday, March 20, 2014 6:26 PM
To: racktables-users@xxxxxxxxxxxxx
Subject: [racktables-users] Re: what's needed to get live ports/cdp/lldp
working?
The documentation on the wiki would be useful for you to read.
You need to configure file to set your login password for the 2 services and
you can also put condition based on if it is a juniper than user=userjuniper;
password=passjuniper and so on ...
You should read it. :)
Olivier Contant
System Administrator, Triton Digital
1440 Ste-Catherine W., Suite 1200 | Montreal, Qc, H3G 1R8
+1.514.448.4037
olivier.contant@xxxxxxxxxxxxxxxxx<mailto:olivier.contant@xxxxxxxxxxxxxxxxx>
________________________________
From:
racktables-users-bounce@xxxxxxxxxxxxx<mailto:racktables-users-bounce@xxxxxxxxxxxxx>
[racktables-users-bounce@xxxxxxxxxxxxx] on behalf of Jonathan Barker
[jonathanbarker@xxxxxxxxxxxxxxxx]
Sent: March 20, 2014 9:19 PM
To: racktables-users@xxxxxxxxxxxxx<mailto:racktables-users@xxxxxxxxxxxxx>
Subject: [racktables-users] what's needed to get live ports/cdp/lldp working?
I don't work at the network level, but i would think getting these tabs working
would be good. What do i need to enable? I have snmp configured and working.
Other related posts:
