The documentation on the wiki would be useful for you to read. You need to configure file to set your login password for the 2 services and you can also put condition based on if it is a juniper than user=userjuniper; password=passjuniper and so on ... You should read it. :) Olivier Contant System Administrator, Triton Digital 1440 Ste-Catherine W., Suite 1200 | Montreal, Qc, H3G 1R8 +1.514.448.4037 olivier.contant@xxxxxxxxxxxxxxxxx<mailto:olivier.contant@xxxxxxxxxxxxxxxxx> ________________________________ From: racktables-users-bounce@xxxxxxxxxxxxx [racktables-users-bounce@xxxxxxxxxxxxx] on behalf of Jonathan Barker [jonathanbarker@xxxxxxxxxxxxxxxx] Sent: March 20, 2014 9:19 PM To: racktables-users@xxxxxxxxxxxxx Subject: [racktables-users] what's needed to get live ports/cdp/lldp working? I don’t work at the network level, but i would think getting these tabs working would be good. What do i need to enable? I have snmp configured and working.