Understood, however the slots don't actually show up on the picture in the rack also as far as I can see there is no way to add the extended information that some of the stock items have. Best regards David Taylor -----Original Message----- From: racktables-users-bounce@xxxxxxxxxxxxx [mailto:racktables-users-bounce@xxxxxxxxxxxxx] On Behalf Of Murray Brydon Sent: Tuesday, 9 September 2014 5:20 PM To: racktables-users@xxxxxxxxxxxxx Subject: [racktables-users] Re: Showing extended info on objects You will get different attributes depending on what type of object you add i.e. Server, Server Chassis etc, you can modify this in the attributes configuration section. If you add a server chassis and choose a particular hardware type then it will get the slot information from the dictionary. If you have a new chassis model that is not in there then you need to create a new dictionary item in a similar format to the entries that are alredy there to show rows/columns. On 9 September 2014 07:01, David Taylor <david.taylor@xxxxxxxxxxxxx> wrote: > Sorry if this has been asked before, I have looked through the > documentation and searched the list so apologies in advance if I’ve missed it. > > > > Ok so I’ve noticed that some equipment has additional information > including visible slots/blades or vendor info links etc. The question > is how to add this type of information to new objects, I can’t find > anything in the dictionary or attributes that looks like it would do > the job so I am assuming it is hard coded into the DB on default objects. > > > > > > Best Regards > > David Taylor > >