[racktables-users] Re: PDU positioning
- From: "Farrington, Ryan" <rfarrington@xxxxxxxxxxxxx>
- To: <racktables-users@xxxxxxxxxxxxx>
- Date: Thu, 29 Jul 2010 22:49:12 -0400
Dave,
We have the same equipment setup in our DC and we just
used the top 2 U "back" positions to put them in place. There is no real
way of getting 0 U equipment into the rack display so we just sucked it
up and made it work.
From: racktables-users-bounce@xxxxxxxxxxxxx
[mailto:racktables-users-bounce@xxxxxxxxxxxxx] On Behalf Of David
Comerford
Sent: Thursday, July 29, 2010 6:19 PM
To: racktables-users@xxxxxxxxxxxxx
Subject: [racktables-users] PDU positioning
Loving RackTables so far, but I have a rack design question.
At the rear of our 42U racks we have two 16 outlet PDU's mounted
vertically on both sides.
What is the best way to "mount" the PDU on the rack?
So far I can only think of putting them on single unused U's at the back
of the rack.
Thanks guys,
Dave
Ryan Farrington
Senior Systems Engineer
MedAssets
Direct 972.244.0312 | Cell 972.836.6431 |
5556 Tennyson Pkwy
Suite 200, Plano, TX 75024
www.medassets.com
The information transmitted is intended only for the person or entity to which
it is addressed and may contain confidential, proprietary, and/or privileged
material. Any review, retransmission, dissemination or other use of, or taking
of any action in reliance upon this information by persons or entities other
than the intended recipient is prohibited. If you received this in error,
please contact the sender and delete the material from all computers
Other related posts:
