[racktables-users] Non-cisco switch support in Racktables
- From: "Farrington, Ryan" <rfarrington@xxxxxxxxxxxxx>
- To: <racktables-users@xxxxxxxxxxxxx>
- Date: Thu, 29 Jul 2010 23:36:41 -0400
Glenn,
As long as your switch supports SNMP we should be able to work
something together. Take a look at the FAQ, linked below, and we will
look at working your switch types into the next release. There are
already a number of ProCurve and NetGear chassis defined so you might
already be covered.
http://sourceforge.net/apps/mediawiki/racktables/index.php?title=FAQ
Ryan Farrington
Senior Systems Engineer
MedAssets
Direct 972.244.0312 | Cell 972.836.6431 |
5556 Tennyson Pkwy
Suite 200, Plano, TX 75024
www.medassets.com
From: racktables-users-bounce@xxxxxxxxxxxxx
[mailto:racktables-users-bounce@xxxxxxxxxxxxx] On Behalf Of Glenn Kelley
Sent: Thursday, July 29, 2010 10:07 PM
To: racktables-users@xxxxxxxxxxxxx
Subject: [racktables-users] Re: PDU positioning
Does Racktables support some of the non-cisco switches such as Netgear
and HP ?
Thanks
The information transmitted is intended only for the person or entity to which
it is addressed and may contain confidential, proprietary, and/or privileged
material. Any review, retransmission, dissemination or other use of, or taking
of any action in reliance upon this information by persons or entities other
than the intended recipient is prohibited. If you received this in error,
please contact the sender and delete the material from all computers
Other related posts:
