Denis, the problem was solved with your help. Thanks a lot. The RackCode expression defined in "List of VLAN-based IPv4 networks" was foolishly configured with "yes". With this option blank, the bind is now possible. Thanks. -- Best regards, Rafael Em 25 de abril de 2012 10:52, Denis Ovsienko <infrastation@xxxxxxxxx> escreveu: > 25.04.2012, 17:14, "Rafael Ganascim" <rganascim@xxxxxxxxx>: >> Thanks Denis, we are already using this version. >> >> But on the page Vlan, tab ipv4, the networks aren't listed anymore (on >> the past, we used this - some networks have vlans associations - but >> the new vlans we can't do this). >> >> I see at demo.racktables.org a select field, with the networks and the >> clip to bind the network. In my racktables, they doesn't exists. > > Is the "IPv4" tab missing or is the SELECT empty? > >> >> We installed the racktables on the version 0.19.09 (and populated it >> with this version), and updated it to 0.19.10.. 0.19.11 and now it is >> 0.19.12. > > This SELECT is populated with a couple of constraints in mind. First, > networks must meet the RackCode expression defined in "List of VLAN-based > IPv4 networks" option (it is empty by default, which matches all IPv4 > networks). Second, a network can relate to a VLAN domain at most once. This > means, the SELECT at this page won't list the networks already linked to any > other VLAN of the current domain. Is this the case? > > -- > Denis Ovsienko >