Hi, Is it possible to add a VLAN to an existing IPv4 Range without the need to delete it? In the WebGui, it seems like it's only possible to add Tag once the object has been created. Would be a nice feature to put on the TODO list if it doesn't exist already. This is very limiting. Sometime it is practical to modify a VLAN ID on a IPv4 range which already has device mapped on it. Thank you, Olivier Contant System Administrator, Triton Digital 1440 Ste-Catherine W., Suite 1200 | Montreal, Qc, H3G 1R8 Tel.: +1.514.448.4037 #2771 | Toll-Free: +1.866.448.4037 #2771 olivier.contant@xxxxxxxxxxxxxxxxx<mailto:olivier.contant@xxxxxxxxxxxxxxxxx> From: racktables-users-bounce@xxxxxxxxxxxxx [mailto:racktables-users-bounce@xxxxxxxxxxxxx] On Behalf Of Bielski, Eric Sent: Friday, March 14, 2014 5:16 PM To: <racktables-users@xxxxxxxxxxxxx> Subject: [racktables-users] Re: multiple tags/ same parent tag Yes On Mar 14, 2014, at 17:05, "Michał Sochoń" <kaszpir@xxxxxxxxx<mailto:kaszpir@xxxxxxxxx>> wrote: You mean to create multiple tags just like create multiple objects of the same type? On Fri, Mar 14, 2014 at 8:34 PM, Bielski, Eric <EBielski@xxxxxxxxxxxxxxxxxx<mailto:EBielski@xxxxxxxxxxxxxxxxxx>> wrote: Is there a development towards creating multiple tags with the same parent tag? How soon will this be available? I have about 40 parents and 10 per parent. It's getting a little time consuming. Eric -- Michal Sochoń alias _KaszpiR_ kaszpir@xxxxxxxxx<mailto:kaszpir@xxxxxxxxx> IRC: _KaszpiR_ @ freenode.net<http://freenode.net>