[python] Re: three wheeler

Arthur K. kirjoitti 12.12.2005 kello 19:21:
> Hello to all,
> 
> i'm new here. I'm planing to build also a treewheeler, but a typical
>  phyton
> construction.
> My questions:  What kind of material (size) did you use for the frame ?
Front part is 30x15x2mm
Under seat tube is 50x50x1.6 or 2mm
behind seat is 30x30x1.6
removable rearpart is 30x18x1.6mm

> Did you braze (what kind of filler) or weld (electro or autogenous) 

 Weld, MIG welder(or how it say?)

>  it ?
> Which way is the the best to bulid a homemade frame ?

 I build only way I can...

Jukka

...................................................................
Luukku Plus paketilla pääset eroon tila- ja turvallisuusongelmista.
Hanki Luukku Plus ja helpotat elämääsi. http://www.mtv3.fi/luukku

============================================================

This is the Python Mailinglist at freelists.org

Listmaster: Jürgen Mages jmages@xxxxxx

To unsubscribe send an empty mail to 
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.

============================================================

Other related posts: