Hello; I measured from the front part of Stefans Carbon Python at http://www.home.pages.at/moontraveler/images/laaanglieger.jpg - it seems to be just under 60 degrees, if his steering BB is exactly at a right angle to the front part. I hope Stefan would tell us about his riding experience compared to Jürgen and Peters'. Also I want to get started building my own; and I need to make some drawings before. Has anybody made some drawings already, that I could use as a base? My inseam is 85cm; that means I should go for 26 inch tires, right? How far should the crank center be from the wheel center to avoid kollisions with the derailleur? Is it a good idea to use non-straight crank arms like the ridiculous "drawing" below to get the feet further away from the derailleur? _ / /=/ _/ thanks for all your advice Rasmus Møller Jürgen Mages <jmages@xxxxxx> Til: "Python Malinglist" <python@xxxxxxxxxxxxx> Sendt af: cc: python-bounce@fre Vedr.: [python] Steering Angle elists.org 16-03-2004 14:09 Besvar venligst til python Now that Peter and I have two pythons to compare, we exchanged our bikes and made some discoveries concerning the steering angle. Mine has exactly 67 degrees and Peter´s approx. 75 degrees (by guessing). Peter tried my bike and it was easier for him to ride. I tried his bike and could ride it, but I felt it was more agile than mine and I had problems with sharp turns. The latter effect might possibly disappear with practice, but so far I would recommend to make the steering angle not too steep. On the other hand do not make the angle too flat because the wheel flop will become too strong. As a conclusion I would recommend a steering angle between 65 and 70 degrees. Jürgen. ============================================================ This is the Python Mailinglist at freelists.org Listmaster: Juergen Mages jmages@xxxxxx ============================================================ ============================================================ This is the Python Mailinglist at freelists.org Listmaster: Juergen Mages jmages@xxxxxx ============================================================