[pure-silver] Re: replenishing system (was re-using DDX)
- From: "Tim Rudman" <tim@xxxxxxxxxxxxxxx>
- To: <pure-silver@xxxxxxxxxxxxx>
- Date: Sat, 1 Apr 2006 10:54:54 +0100
Hi Ryuji
Thanks for posting your excellent Wiki site. A mine of information.
Tim
BTW, under 'mounting' you mention corners and that they are mainly suitable
for smaller works.
Secol now make V shaped edges too. They are of similar material with
adhesive backing (like corners) but in strips and these are useful in
addition to corners to hold the edges of larger works.
Tim
http://www.worldbookoflithprinting.com
-----Original Message-----
From: pure-silver-bounce@xxxxxxxxxxxxx
[mailto:pure-silver-bounce@xxxxxxxxxxxxx] On Behalf Of Ryuji Suzuki
Sent: 01 April 2006 01:39
To: pure-silver@xxxxxxxxxxxxx
Subject: [pure-silver] replenishing system (was re-using DDX)
http://wiki.silvergrain.org/wiki/index.php/Replenishing_system
I might edit/add later, but only after a glass of Sangiovese and a few shots
of Absolut.
============================================================================
=================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you
subscribed,) and unsubscribe from there.
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
