Okay die hards....here is your chance to get a real enlarger...cheap! Dave ----- Original Message ----- From: cynthia.meding@xxxxxxxxx To: cynthia.meding@xxxxxxxxx Sent: Tuesday, March 25, 2008 2:14 PM Subject: Transmission Electron Microscope bid sale 807 From Cindi Meding EASTMAN KODAK COMPANY Is Announcing EQUIPMENT BID SALE # 807 We are offering for bid sale a Transmission Electron Microscope in operational condition. This piece of equipment is located at our Kodak Park facility at Rochester, New York. Per our Standard Surplus Sales Agreement, removal and transportation is the responsibility of the buyer; however, riggers must meet all Kodak requirements regarding safety and insurance liability, prior to starting work. Item: Transmission Electron Microscope in operational condition. Details: FEI/Philips CM12T TEM/STEM S/N D652 Purchased: 1987 Breakdown of equipment Microscope Wide angle TV rate camera Elemental Detection System (EDS) detector & motorized control Longer description: This analytical 120 kV TEM/STEM has been in operation and under maintenance contract from purchase until the end of March 2008. The microscope will be supplied with a standard, single tilt specimen holder that fits the ±60 degree side-entry goniometer stage. The microscope will be supplied with 2 plate cameras and cassettes and a Gatan 673 wide angle TV camera in the 35 mm port. The microscope has an off-axis STEM detector and water lines to permit easy installation of a Gatan bottom mount slow scan CCD camera (not supplied.). The microscope will also be supplied with a working EDAX thin window RTEM EDS detector. This detector has an optimized collimator. It currently has ~180 eV energy resolution and should be serviced before use. We will also supply an RTEM motorized control. This is a very incomplete EDS system (won't work 'as is') but could be updated to a fine working system for much lower cost than a new system. The basic microscope is currently working but is supplied 'as-is'. Purchaser is responsible for dismantlement, shipping, and re-installation. We strongly recommend FEI Service be consulted prior to movement/re-installation. BID: _______________________________ If you have technical questions about this equipment, please contact John Minter at 585-722-3407 If you have questions about the bid process, please contact Cindi Meding at 585-588-6571 The bid closing date on this equipment is April 22, 2008, 3:30pm EST. All offers should be faxed to fax # 585-588-7690 or e-mailed to cynthia.meding@xxxxxxxxx by close of business that day. An invoice will be generated after receiving your signed sales agreement. A COPY OF YOUR STATE TAX EXEMPT FORM, IF WE DO NOT HAVE THE MOST RECENT ONE, SHOULD BE INCLUDED WHEN RETURNING THE SIGNED SALES AGREEMENT. IF ONE IS NOT RECEIVED WE WILL CHARGE YOU SALES TAX. BEFORE A SHIPMENT WILL BE MADE, A CHECK FOR THE FULL AMOUNT OF THE PURCHASE PRICE, MADE OUT TO "EASTMAN KODAK COMPANY", MUST BE RECEIVED WITHIN 10 DAYS OF NOTIFICATION OF THE WINNING BID. Please send the payment check and a copy of the invoice, to the "remit to" address found on the upper left hand side of the invoice. THE ITEMS ARE OFFERED FOR BID "AS IS" AND THE SALE WILL BE CONDUCTED BY OUR "STANDARD SURPLUS MATERIALS SALE AGREEMENT", A COPY OF WHICH IS AVAILABLE UPON REQUEST. KODAK DISCLAIMS ANY WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. KODAK WARRANTS TITLE TO THE MATERIAL. SHIPPING ARRANGEMENTS, AND THE ASSOCIATED CHARGES, WILL BE THE RESPONSIBILITY OF THE SUCCESSFUL BIDDER. THE METHOD OF SHIPMENT MUST BE CONFIRMED AND AGREED BY EASTMAN KODAK. PLEASE ADDRESS ALL INQUIRIES AND CORRESPONDENCE TO: EASTMAN KODAK COMPANY ATTN: CINDI MEDING (INVESTMENT RECOVERY) BLDG. 326 3rd FL, MC. 25126 100 LATONA ROAD ROCHESTER, NY 14652-5126 TELEPHONE: (585) 588-6571 FAX:(585) 588-7690 E-MAIL: cynthia.meding@xxxxxxxxx A picture of this piece of equipment is attached below (See attached file: cm12t_D657.jpg)
Attachment:
cm12t_D657.jpg
Description: JPEG image
