[pure-silver] Re: Size of 4 by 5 film

  • From: Dana Myers <dana.myers@xxxxxxxxx>
  • To: pure-silver@xxxxxxxxxxxxx
  • Date: Thu, 17 Mar 2016 09:14:32 -0700

On 3/17/2016 8:24 AM, Tim Daneliuk wrote:

On 03/17/2016 10:14 AM, bobkiss caribsurf.com wrote:
Am I REALLY the only one who knows that you can simply push that little door 
switch along the inside edge of the door frame to make sure it is working and 
turns off the light when the door is closed.  Push and release, push and 
release.  The light should go of and on, off and on.
If you doubt it, go around to the outside edge of the door and put your little 
finger in there over the switch and close the door to make sure it is working.
***DO NOT DO THIS!!!  For those who are presently reading "Gullible's Travels" 
THIS IS A JOKE.  If you put your finger in there it will get crushed by the door!!!  I 
figured I had better put in this disclaimer!

Ha!  The joke's on all of you.  My new Super-Duper-Fridge 9000 uses LED 
lighting (no measurable heat rise) and
optical sensors for door close (which are not so easy to get to).


So ... putting a digital camera inside on delayed exposure is actually 
indicated.

You have a very good point; my newer (1 year old) LG refrigerator also uses LED
lighting (marvelous) and optical door-position detection. The power-measurement
approach yields little conclusive data.

I would suggest using video on high-speed capture to make sure there are no
other anomalies introduced by the solid-state lighting technology. You never 
know
about these new-fangled, little-proven technologies.

SO THERE!

P.S. Until such time as I can download a sandwich, I see no use case for 
connecting my fridge to the internet...

My BBQ smoker is connected to the Internet :-)

Dana  K6JQ

=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: