Good idea sending in the standards etc. Back in ancient times I went to the Deardorf factory here on a tour w/a photo group. Jack said, if asked, he would supply one with the schematics and the math formulas so to make your own replacement bellows. I looked it over and from that I learned I'd never attempt it. It was his way of emphasizing the difficulty in making bellows and justified the cost. Eric ________________________________ From: Bogdan Karasek <bkarasek@xxxxxxxxxxxx> To: pure-silver@xxxxxxxxxxxxx Sent: Monday, February 2, 2009 7:01:20 PM Subject: [pure-silver] Re: Replacement bellows for full plate camera Thanks Eric and everybody else who contributed information. Everybody, including some of the comments I picked up when I did a Google search, seems to be quite high on "camera bellows" in the UK although postage is a factor. I'm planning on sending the eventual company I chose, the complete bellows along with the front and rear standard. This way, I get a good fit and I don't have to worry about attaching the bellows properly to the respective standards. Again Thanks everybody; you've all been a great help. Cheers, Bogdan