[pure-silver] Re: Old roll of E6 update
- From: Snoopy <snoopy@xxxxxxxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Fri, 30 Aug 2013 11:09:51 +0200
Hmm, if the film was unexposed it should come out as all black with the
yellow frame numbers and film type on the top and bottom "margins". This
gets exposed onto the film by the manufacturer.
And you can certainly feel if the emulsion/gelatin came off during
development.
If it is all clear (with the emulsion still present) then your chemistry
was off...
This can happen - E6 chemistry ages quickly even in the sealed
containers. I always do a test development if I am not sure.
Love
Snoopy
On 08/29/2013 07:51 PM, mark@xxxxxxxxxxxxxxxxxx wrote:
> Well thought I would post the results Not really surprised to find that
> the roll of film came out clear with no images at all on it. I thought
> there might be something that would at least give me a clue as to what
> it might have been. This time nothing.
>
> Either the latent image had just degraded over time, maybe I fouled
> something up in the processing or maybe the emulsion and base separated
> Still at least at this point its done and I know no surprise jewels.
>
> Mark
> ==========================================================================================================To
> unsubscribe from this list, go to www.freelists.org and logon to your
> account (the same e-mail address and password you set-up when you
> subscribed,) and unsubscribe from there.
--
"Ceterum censeo, digitalem esse delendam"
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
