I believe Ken worked for Deardorff. He rebuilds Deardorff cameras
and does other work. I have not been in contact with him for some time
so I don't know what services he offers now. He is THE Deardorff expert.
On 8/25/2016 11:44 PM, Richard Lahrson wrote:
Thanks Richard,
Isn'd Ken an ex-deardorff worker?
I'll probably just wait for a 2-D back to
come up for sale. They seem to
appear often.
Rich
On Thu, Aug 25, 2016 at 10:25 PM, `Richard Knoppow <dickburk@xxxxxxxxxxxxx <mailto:dickburk@xxxxxxxxxxxxx>> wrote:
Ken wrote back that Deardorff backs will not fit directly to Kodak
cameras. He has made adaptors. I hope he becomes active on the list.
On 8/25/2016 5:58 PM, `Richard Knoppow wrote:
Ken Hough wrote me, I wrote back asking about the Deardorff
backs. He is the expert. Since he wrote me he must be seeing this
list and I invite him to respond directly.
On 8/25/2016 5:41 PM, `Richard Knoppow wrote:
Kind of dull gray sounds like B&J although Ansco used a
similar color for its post-war cameras. The military had a spec
for an 8x10 general purpose camera written for the 2D, Ansco
built a version of their Universal View to meet the spec, i.e.
with a 6x6 lens board instead of the larger standard one. B&J I
think also tried to meet this spec, certainly B&J lens boards
are indentical to the 2D so its possible the backs are too. I
have only the Agfa and a Calumet C-1 (a green one). Never had a
2D or Deardorff.
On 8/25/2016 5:27 PM, Richard Lahrson wrote:
Richard,
When I bought the Eastman 8x10 2-D it came as a package with
2 8x10 backs, one the correct Eastman back and the other back,
which fits also, a grey painted back with stainless springs,
possibly
a B&J, not sure. I think the original owner got the second
back because
the springs on the original Eastman are somewhat weak.
Rich
On Thu, Aug 25, 2016 at 5:12 PM, `Richard Knoppow
<dickburk@xxxxxxxxxxxxx <mailto:dickburk@xxxxxxxxxxxxx>> wrote:
I never had a Deardorff but I think the dimensions of
the backs are different. Neither back fits my Agfa/Ansco
either.
On 8/25/2016 4:52 PM, Richard Lahrson wrote:
Hi,
Will the Deardorff 8x10 to 5x7 reducing back fit the
8x10 Eastman 2-D? It looks like the four pins on the
back are the same. Any wisdom here appreciated?
Were parts more interchangable in the past?
Rich
-- Richard Knoppow
dickburk@xxxxxxxxxxxxx <mailto:dickburk@xxxxxxxxxxxxx>
WB6KBL
-- Richard Knoppow
dickburk@xxxxxxxxxxxxx <mailto:dickburk@xxxxxxxxxxxxx>
WB6KBL
-- Richard Knoppow
dickburk@xxxxxxxxxxxxx <mailto:dickburk@xxxxxxxxxxxxx>
WB6KBL
-- Richard Knoppow
dickburk@xxxxxxxxxxxxx <mailto:dickburk@xxxxxxxxxxxxx>
WB6KBL