genej2@xxxxxxx wrote: > I was using an old 3x4 RB Graflex with a graflex 2 1/4 x 3 1/4 > rollfilm back. This back is unfortunately one without the extra > flattening rollers and I've just learned the hard way that those are > important. Didn't ruin the pictures. We were going for "soft and > dreamy" anyway. But I didn't have sharp eyelashes and I had to know > why. The old back produced a film bulge all the way down the center > of the frame of about 1mm. I checked my other graflex 6x9 back with > the rollers and it was about .1mm. My Mamiya RB back was > essentially dead flat. I really like the camera, so I'm trying to > figure out how to get the film flatter. Might have to add my own > rollers. You might want to check with SK Grimes <http://www.skgrimes.com/>. In their "What's New! => New Now" section they mention that they are now set up to add rollers to older Graflex 6x7 and 6x9 rollfilm backs. I have no idea what they would charge for this, but they did some nice work for me on a Lee Filter lens hood adapter and some other bits and pieces a while ago. -- Brian Reynolds | "It's just like flying a spaceship. reynolds@xxxxxxxxx | You push some buttons and see http://www.panix.com/~reynolds/ | what happens." -- Zapp Brannigan NAR# 54438 | ============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.