[pure-silver] Re: ADV: Another Lovely Paper Discovered
- From: "Richard Knoppow" <dickburk@xxxxxxxxxxxxx>
- To: <pure-silver@xxxxxxxxxxxxx>
- Date: Fri, 29 Apr 2011 13:50:24 -0700
----- Original Message -----
From: "Dennis Purdy" <dlp4777@xxxxxxxxxxxxx>
To: <pure-silver@xxxxxxxxxxxxx>
Sent: Friday, April 29, 2011 1:30 PM
Subject: [pure-silver] Re: ADV: Another Lovely Paper
Discovered
A coincidence I just received some Arista Ultra EDU and am
trying to print a job with the RC VC. If you use RC I
personally hate this Perle surface. Pretty plasticy. I
generally use fiber and that surface won't exist there.
It is printing fine. A bit flatter than the Ilford MG RC
but adjustable.
Dennis
On Apr 29, 2011, at 12:31, Tim Daneliuk wrote:
I think the "pearl" surfaces are supposed to resemble
un-ferrotyped fiber glossy, they don't:-(
My darkroom is still down, need to get it working
again. Freestyle is only a couple of miles from here so its
easy for me to check on what they have. They seem to be
supporting "wet" photography more than most.
--
Richard Knoppow
Los Angeles, CA, USA
dickburk@xxxxxxxxxxxxx
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
