Yes, set rigptttune to 1 to have it tune when it gets a ptt on a new frequency. I have to set that in my 706 also and it works fine with my AH-4 and flagpole. /P ons 2011-07-27 klockan 08:56 +0200 skrev Rein Couperus: > Klaus, attached a pic of the fldigiconfig for the 7200 at PI4TUE. > > If you want autotune, set $rigptttune = 1; in pskmailrc.pl > (I think, Per may be able to confirm this..) > This parameter is default 0 until you set it in pskmailrc.pl. > > Rein PA0R > > -- > http://pa0r.blogspirit.com > > -----Ursprüngliche Nachricht----- > Von: "Klaus Lohmann" <dl4oah@xxxxxxxxxx> > Gesendet: Jul 26, 2011 9:44:38 PM > An: pskmail@xxxxxxxxxxxxx > Betreff: [pskmail] Server 1.3.0 > > > > >Today I tried to restart my server project. > > > >2 Issues for the moment: > > > >1. Transceiver goes into transmit mode, i.e. for QSL or beacon, and stays > >there. > >2. There is a variable $rigptttune (useful in my setup), which is not in > >pskmailrc.pl? > > > >Transceiver is an ICOM IC-7200 with Icom compatible autotuner and more > >ore less ;-) multiband antenna. > > > >Rig control in fldigi is set to "Use XML-RPC program". > > > >Any hints where to look at? > > > >Thanks in advance > >Klaus > >DL4OAH > > > > >