I was out listening to the server and my impression is that fldigi now takes longer to end the transmissions. Its like it hangs for a second longer and that destroys the rsid from the connected client. I tried to remove the .fldigi folder and reconfigure fldigi but it still behaves the same. I would think that was the reason why it stayed in psk500r for too long. Rein, do you have any ideas what could cause this? 73 de Per, sm0rwo fre 2011-01-07 klockan 11:33 +0100 skrev Franco Spinelli: > 2011/1/7 Rein Couperus <rein@xxxxxxxxxxxx>: > > OK, I just tested QTC? on SM0RWO, and in the following log from SM0RWO > > you can see that it starts with mail nr. 216... > > > > Actually, the first time I connected SM0RWO did not receive my RSID, so I > > quit, > > and reconnected. This time the RSID was picked up, and the connection went > > to > > PSK500 up/PSK500R down... > > > > This was tested with jPSKmail-0.8.6. > > > > RX (2011-01-07 09:58Z): > > TX (2011-01-07 09:58Z): -0)"Your mail: 1512 > > TX (2011-01-07 09:58Z): 216 Rein Couperus [pskmail] ReD6CB0)#: QTC and > > other problems 897 > > TX (2011-01-07 09:58Z): 217 Rein CouF7800)$perus [pskmail] Re: GPS USB & > > LiveCD 62040)% 1749 > > TX (2011-01-07 09:58Z): 218 Franco Spinelli [ps736A0)&kmail] Re: QTC and > > other problems 670 > > So the server is OK and the problem is on my config. > > I am unable to do some test now. I am at work. > > Can i check some file or config parameter in my ~/.pskmail directory? > > Regards > Franco Spinelli > IW2DHW >