Hi, yes you are correct, it did not help, so very QRT here on this network until the next release :-( Thanks for your help. Vic Date: Fri, 5 Jul 2013 18:35:21 +0200 Subject: [pskmail] Re: Aw: 2.1.0.2 audio channel selection From: per@xxxxxxxxxxxx To: pskmail@xxxxxxxxxxxxx Hi, The 706 does not have a PTT cat command so I'm afraid it won't help. I will add the PTT code from the v2modem but I've been busy... 73, Per Sm0rwo victor maddex <vmaddex@xxxxxxxxxxx> skrev: Hi Rein, I will put together a CAT cable for my IC706 at the weekend and see if that will get me round the hardware PTT issue. Thanks Vic From: rein@xxxxxxxxxxxx To: pskmail@xxxxxxxxxxxxx Subject: [pskmail] Aw: 2.1.0.2 audio channel selection Date: Tue, 2 Jul 2013 16:16:58 +0200 What if you set audio to mono? There is no right/left channel selection in jpskmail, it has to be done in the audio widget of win7, or in the pulse audio volume control in Linux. I can make it possible to use any ICON from the APRS set, it is on the todo list now. Rein PA0R Hi, I seem to have an issue with the left hand and right hand channel selection in use, it seems the channel selection is for right hand channel, unfortunately both of the isolated interfaces I have, seem to use the left channel, I can modify the cable, but wondered if this could be a software selection, this is available with APRS Messenger software. I noticed there was no 4x4 or jeep icon for APRS, can this be added ? I hope we can get the hardware PTT working, you may see some packets from me then. Thanks Vic