Hi, The 706 does not have a PTT cat command so I'm afraid it won't help. I will add the PTT code from the v2modem but I've been busy... 73, Per Sm0rwo victor maddex <vmaddex@xxxxxxxxxxx> skrev: ><!-- .hmmessage P { margin:0px; padding:0px } body.hmmessage { font-size: >12pt; font-family:Calibri } --> > >Hi Rein, > >I will put together a CAT cable for my IC706 at the weekend and see if that >will get me round the hardware PTT issue. > >Thanks > >Vic > > >From: rein@xxxxxxxxxxxx >To: pskmail@xxxxxxxxxxxxx >Subject: [pskmail] Aw: 2.1.0.2 audio channel selection >Date: Tue, 2 Jul 2013 16:16:58 +0200 > >What if you set audio to mono? > >There is no right/left channel selection in jpskmail, it has to be done in the > >audio widget of win7, or in the pulse audio volume control in Linux. > > > >I can make it possible to use any ICON from the APRS set, it is on the todo >list now. > > > >Rein PA0R > > > > >Hi, > >I seem to have an issue with the left hand and right hand channel selection in >use, it seems the channel selection is for right hand channel, unfortunately >both of the isolated interfaces I have, seem to use the left channel, I can >modify the cable, but wondered if this could be a software selection, this is >available with APRS Messenger software. > >I noticed there was no 4x4 or jeep icon for APRS, can this be added ? > >I hope we can get the hardware PTT working, you may see some packets from me >then. > >Thanks > >Vic > > >