ok, I think you need to go into the program as well and set it there, on my unit, when I plug in my additional sound card all my sound changes to it, I then go and reset the audio application to output through the realtech in it and it plays my sound files and music through my speakers while my jaws and the like plays through the headphones I plug into the second sound card. check it out, elf proprietor, The Grab Bag, for blind computer users and programmers http://grabbag.alacorncomputer.com Owner: Alacorn Computer Enterprises Specialists in customized computers and peripherals - own the might and majesty of a Alacorn! www.alacorncomputer.com ----- Original Message ----- From: Kristoffer Gustafsson To: programmingblind@xxxxxxxxxxxxx Sent: Saturday, June 12, 2010 12:35 AM Subject: Re: help with sound recordning Hi. I've edited it in the control panel, wich sound devices windows shall use. the devices for sound input, and output. The hd audio input is the recording device, and realtek hd audio output is set too, and the output works. /Kristoffer ----- Original Message ----- From: The Elf To: programmingblind@xxxxxxxxxxxxx Sent: Saturday, June 12, 2010 5:43 AM Subject: Re: help with sound recordning you've told the recording program that it's to use the realtech card as its primary device for recording? from what I have seen you need to have both cards in and on when you make the change in settings also. HTH, elf proprietor, The Grab Bag, for blind computer users and programmers http://grabbag.alacorncomputer.com Owner: Alacorn Computer Enterprises Specialists in customized computers and peripherals - own the might and majesty of a Alacorn! www.alacorncomputer.com ----- Original Message ----- From: Kristoffer Gustafsson To: programmingblind@xxxxxxxxxxxxx Sent: Friday, June 11, 2010 6:24 AM Subject: help with sound recordning Hello. I'm planning to record a radio show. I got two soundcards, one audigy 2zs, and an integrated realtek soundcard on the motherboard. The recording works fine with the audigy card, but not with the oter one I want to use. Is there anything I must do in order to get recording to work? I've set the corect settings for recording volome, mic in, etc. /Kristoffer Kristoffer Gustafsson Trelleborgsvägen 1b 514 33 Tranemo tel: 0325-42093 mobil: 073-8226473 e-post: kg84@xxxxxxxxxxxx Eller kristoffer_gustafsson@xxxxxxxxxxx