Dan, The answer you seek is a resounding YES, you can! But that doesn't mean I have the know-how to help you put one together. I can tell you that one of the networks will rely on the standard 192.168.x.x addresses for the systems that can access it (I would try to make this the one that your friends connect to, just to keep their connections simple), while the other can use one of the other two address ranges set aside for private networks (10.x.x.x OR 172.16.0.0 - 172.31.255.255 ). Most routers have the means within their settings areas to allow you to dictate which address scheme you wish to use for that network, so one router might be set to use 10.x.x.x with the other set to use 192.168.x.x. The first router in the chain (the one serving your own network) will get its internet feed from your assigned external ISP IP (the router will set this part up automatically). The second router will get its internet feed from whatever IP is assigned to it by the first router. So, if your primary network is using the 10.x.x.x range, it may give the second router an IP of 10.0.0.5 to feed from. That second router will them distribute that feed to each of its 192.168.x.x systems as well as handle all of the routing between the systems on the secondary network. I'm not sure how easy/possible it would be to "LAN Party" across the two IP ranges, if that's what you're after. To get specific info beyond that, you'll have to do your research and map out the full structure (along with necessary settings) well before you begin physically putting it together. Like most things, it'll be easy to do once you know what needs to be done. The hard part is working through all the info you'll likely find on the subject to figure out which of it pertains to your needs. Peace, Gman "The only dumb questions are the ones we fail to ask" http://www.bornagainamerican.org ----- Original Message ----- From: "Dan Chisolm" <d0ct0rdan@xxxxxxxxxxx> To: <pctechtalk@xxxxxxxxxxxxx> Sent: Wednesday, February 04, 2009 5:10 PM Subject: -=PCTechTalk=- Cascading Wireless Routers > > Is there a way to cascade two wireless routers such that each is on a > separate network (security enabled)? During visits, I want my friends > (with PDAs) to be able to access the Internet wirelessly on a network, > which is separate from mine. This is so that I could maintain my network > security. > > Thanks in advance for your response. > > Dan --------------------------------------------------------------- Please remember to trim your replies (including this sentence and everything below it) and adjust the subject line as necessary. To unsubscribe or change your email settings: //www.freelists.org/webpage/pctechtalk To access our Archives: http://groups.yahoo.com/group/PCTechTalk/messages/ //www.freelists.org/archives/pctechtalk/ To contact only the PCTT Mod Squad, write to: pctechtalk-moderators@xxxxxxxxxxxxx To join the PCTableTalk off-topic group, send a blank email to: pctabletalk+subscribe@xxxxxxxxxxxxxxxx ---------------------------------------------------------------