-=PCTechTalk=- Enable Dual Boot After You Install ME on a W2k-based PC
- From: Master NetLord <NetLord@xxxxxxx>
- To: PCTechTalk - Freelists <pctechtalk@xxxxxxxxxxxxx>,WinTips-Tricks <WinTips-Tricks@xxxxxxxxxxxxxxx>,WinXPHelp <WinXPHelp@xxxxxxxxxxxxxxx>
- Date: Mon, 8 Jul 2002 09:12:30 -0400
>From Lockergnome...........
Enable Dual Boot After You Install ME on a W2k-based PC
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q293401
"This article describes how to enable a dual boot configuration on a Microsoft
Windows 2000-based computer on which you have installed Microsoft Windows
Millennium Edition (Me). When you install Windows ME on a Windows 2000-based
computer, the W2k boot menu may not appear. To enable a dual-boot
configuration,
repair the Windows 2000 installation. To do this, follow these steps: Start
Windows
2000 Setup. On the Welcome to Setup page, press R. On the Windows 2000 Repair
Options page, press R. When you are prompted to Select one of the following
repair
options, press M. Press the UP ARROW twice to select Verify Windows 2000 system
files, and then press ENTER to clear the selection. Press the DOWN ARROW to
select
Continue (perform selected tasks), and then press ENTER."
Regards from the
"Keyboard Cowboy",
Master NetLord
,,,,,
Ô¿Ô¬
Cincinnati, Ohio
Scottsdale, Arizona
«::::»¤«::::»¤¤«::::»¤«::::»
Monday
07/08/2002
9:11:42 AM
To unsub or change your email settings:
//www.freelists.org/webpage/pctechtalk
To access our Archives:
http://groups.yahoo.com/group/PCTechTalk/messages/
//www.freelists.org/archives/pctechtalk/
Other related posts:
- » -=PCTechTalk=- Enable Dual Boot After You Install ME on a W2k-based PC
