Dear Jose, It is a bit odd that just that one grid failed for the tbcc test. I recall there was some issue perhaps with the symmtrey BC's that I might have now fixed so maybe you have no cause for concern. I suggest that you ignore this problem and proceed with caution. Regards, Bill Jose Juan Ramos wrote:
Hi everyone,I have a error in the test of operators and grid functions, only have problems with the tbcc application (tests boundary conditions for coefficient matrices). Apparently, some estimates exceed the suggested minimum error (according with the file tbcc.c the minimum error is 0.01)I attach the outputs. I hope your suggestions. Jose Juan Ramos Hernandez Facultad de Química Universidad Nacional Autónoma de México UNAM - http://*www.*unam.mxWhen I write ./check.p in the console for a test of overture, I get the following output (in summary):==================================================================================== check.p : This perl script will run the Overture regression testsUsage: check.p [debug=true/false][grids=false][cadGrids=false][op=false][rap=false] debug=true/false : see more detailed results printed to the screen if true.grids=false : turn off the test for grid generation. cadGrids=false : turn off the test for grid generation from CAD. op=false : turn off the test for operators. rap=false : turn off the test for rapsodi (CAD fixup tests)==================================================================================************************************************************************************************ *** Test: build grids : build a collection of overlapping grids in the sampleGrids directory *** ************************************************************************************************... ... ... ================================================== ============ Test apparently successful ========== ================================================== >>>make sampleGrids successful!************************************************************************************************ *** Test: grids from cad : build grids from CAD geometries (in the sampleGrids directory) *** ************************************************************************************************... ... ... ========================================================= ==== gridsFromCad.p : Tests apparently successful ======= ========================================================= >>>gridsFromCad.p successful!************************************************************************************************ *** Test: test operators and grid functions (in the tests directory) *** ************************************************************************************************>>>cd /home/josejuanramos/aplicaciones/Overture.v23/tests... >>>run checkop.p ================================================================================This perl script will run some regression tests on grid functions and operators.Usage: checkop.p [<application>] (or `perl checkop.p') Notes:Applications: tderivatives : tests derivatives in the operators. tbcc : tests boundary conditions for coefficient matrices. tbc : tests explicit boundary conditions. tcm3 : tests coefficient matrix solver on a CompositeGrid ==============================================================================*** precision=double, parallel= **** running tderivatives... Running: ./tderivatives > tderivatives.out compare files tderivatives.dp.check.new and tderivatives.dp.check smartDiff: files tderivatives.dp.check.new and tderivatives.dp.check agree. ...tderivatives appears to be correct running tbcc... Running: ./tbcc > tbcc.out compare files tbcc.dp.check.new and tbcc.dp.checksmartDiff:ERROR 0: keys match but not results, file1 tbcc.dp.check.new, line 301 and file2 tbcc.dp.check, line 301. file1:<<sib/box/order=2/std/finishBC (extrapolate) >> : err = 7.0e-01 file2:<<sib/box/order=2/std/finishBC (extrapolate) >> : err = 0.0e+00 smartDiff:ERROR 1: keys match but not results, file1 tbcc.dp.check.new, line 302 and file2 tbcc.dp.check, line 302. file1:<<sib/box/order=2/std/finishBC (evenSymmetry) >> : err = 9.0e-01 file2:<<sib/box/order=2/std/finishBC (evenSymmetry) >> : err = 0.0e+00 smartDiff:ERROR 2: keys match but not results, file1 tbcc.dp.check.new, line 303 and file2 tbcc.dp.check, line 303. file1:<<sib/box/order=2/std/finishBC (oddSymmetry) >> : err = 6.5e-01 file2:<<sib/box/order=2/std/finishBC (oddSymmetry) >> : err = 0.0e+003 errors and 0 warnings found.++++ The new check file for tbcc (top) differs from the old file tbcc.dp.check (bottom)++++running tbc... Running: ./tbc > tbc.out compare files tbc.dp.check.new and tbc.dp.check smartDiff: files tbc.dp.check.new and tbc.dp.check agree. ...tbc appears to be correct running tcm3... Running: ./tcm3 -check > tcm3.out compare files tcm3.dp.check.new and tcm3.dp.check smartDiff: files tcm3.dp.check.new and tcm3.dp.check agree. ...tcm3 appears to be correct ************************************************** ************ There were 1 ERRORS **************** ************************************************** XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ERROR return rt=256 An ERROR occured for the test=gridFunctions You may want to check the appropriate log file=. XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX *************************************************************************************************** Run the rapsodi tests (CAD fixup etc.) (in the sampleMappings directory) *** ************************************************************************************************... ... ... ================================================== ============ Test apparently successful ========== ================================================== rap test check.p successful ... ... ... >>>rap tests successful!************************************************************************************************ ****************** Tests: passed = 3, failed=1 ***************************************** ************************************************************************************************