[overture] Re: 3d cns

  • From: Bill Henshaw <henshaw@xxxxxxxx>
  • To: overture@xxxxxxxxxxxxx
  • Date: Mon, 15 Dec 2008 10:09:45 -0800

Hi Joel,
  We have been running quite a few 3D cns cases. I know we
have fixed some issues with 3d parallel AMR. It must be
that there are some bugs in your version. Hopefully I will
be able to put out a new version sometime soon.

Regards,
 Bill.

Joel Guerrero wrote:

By the way,

I'm getting the same segmentation error for all cns 3d cases.  It is fully 
working the 3d version of the cns solver?

Joel


----- Original Message ----
From: Joel Guerrero <joegi.geo@xxxxxxxxx>
To: overture@xxxxxxxxxxxxx
Sent: Sunday, December 14, 2008 10:08:59 PM
Subject: [overture] 3d cns

Hi,  I'm trying to run a 3d case using cns but I-m getting this error.

0.000e+00 gamma=1.400e+00
a=1.00e+00, b=0.00e+00, c=0.00e+00, d=2.50e-01, stepPosition = 2.500000e-01, stepSharpness=0.000000e+00 uLeft = [2.667e+00,1.250e+00,0.000e+00,0.000e+00,1.205e+00,] 
uRight = [1.000e+00,0.000e+00,0.000e+00,0.000e+00,7.144e-01,]
assignIC: step function: grid=0 stepNormal=( 1.00e+00, 0.00e+00, 0.00e+00), 
stepNormalEquationValue= 2.50e-01
continue
debug
1 7 31
debug=1
continue
---assigning reynoldsNumber to match mu----
---assigning machNumber to match Rg----
inside DomainSolver::setup
DomainSolver::initialize: numberOfGridFunctionsToUse= 2, numberOfExtraFunctionsToUse=1 +++++DomainSolver::initialize: cg.numberOfComponentGrids=1 ++++++++++++++ 
**** Build AMR levels for the initial conditions... *****
interpolateAndApplyBoundaryConditions (start) steps=-1 t=0: number of array 
ID's has increased to 498
Overture::checkMemoryUsage:  interpolateAndApplyBoundaryConditions (start) 
steps=-1 t=0, myid=0: memory usage has increased to 21.1523 (Mb)
*****Build AMR level = 1 Segmentation fault 


I get this error trying to run the shockTube3d.cmd testcase included in the cg 
distributuion, any idea what could be the error?


Regards,

Joel

Other related posts:

  1. Home
  2. overture
  3. Archive
  4. 12-2008