Dnia środa, 28 kwietnia 2010 13:30, Ujang Jaenudin napisał: > dear lists, > > anyone have deployed rac 10.2.0.4.3 on rhel 5.4 x86_64 which using NIC > bonding + trunking + jumbo frames? > is there any issue, which bugs / patches should I have to consider? > > I plan to deploy RAC and should reach 2000+ tps > and should minimize single point of failure... Not sure about 10.2.0.4, but 11.1.0.6/11.2 still uses mii-tool in racgvip (VIP failover). Notes from racgvip/11.1.0.6 script: " - if mii-tool reports the link is down, use ifconfig to verify the link status. - use mii-tool to check if the interface is up. If mii-tool does not exist or fails, "ping -r -I <interface> <default gw>" will be used instead." but mii-tool executed on bond interfaces seems to always to return "10 Mbit, half duplex, link ok", not to mention that mii-tool is marked deprecated in it's own manpage (checked OEL 5.5 a few seconds ago). BTW: There is "Bug 8333262: VIP NOT FAILING OVER WHEN CABLE UNPLUGGED" with workaround "do not pull cable" :)))))))) You can fallback to old code by setting MIITOOL variable to /some/not/existent/file. -- Jakub Wartak http://jakub.wartak.pl/blog -- //www.freelists.org/webpage/oracle-l